ENFORCER SLI 820R/-4
Tech Manual
SECO-LARM U.S.A., Inc.
Page 2
The information and specifications printed in this manual are current at the time of publication.
However, the SECO-LARM policy is one of continual development and improvement. For this reason,
SECO-LARM reserves the right to change specifications without notice. SECO-LARM is also not
responsible for misprints or typographical errors.
Copyright ©2002 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced
or copied, in whole or in part, without the written permission of SECO-LARM. This vehicle security
system is protected by patents in the U.S.A., Great Britain, Germany, Hungary, Taiwan, China, Japan,
and Korea. Other U.S.A. and international patents are pending.
General Considerations ......................... 3
Connection Diagram ............................. 4
Specifications ........................................ 5
Mounting the Alarm Brain ...................... 5
Wire connections For all vehicles
8-pin connector
RED wire (+12 volts) .......................... 6
3 x ORANGE wires (parklights) ........ 6-7
BLACK wire (ground) .......................... 7
WHITE wire (starter disable) ................ 7
PINK wire (siren) ............................ 7-8
YELLOW wire (ignition switch) ............. 8
6-pin connector
BLUE wire (neg door switch) ................ 8
PURPLE wire (pos door switch) ............ 8
BLUE/WHITE wire (hood/trunk) ........... 8
BROWN/WHITE wire (car horn output) . 8
BLACK/WHITE wire (2nd ch. output) . 8-9
GRAY/BLACK wire (domelights) ........... 9
Wire connections For factory remotes
3-pin connector
Door lock interface ..................... 10-11
Wire connections For SLI 820R/-4
remotes
3-pin connector
Door lock interface ..................... 12-14
4-pin connector
Dual-stage shock sensor ............. 14-15
2-pin connector (LED) ........................... 15
2-pin connector (push-button) .............. 16
Current Sensing & Switch Sensing ........ 16
Starter Disable Programming ............... 16
Code Learning .................................... 17
VEPLe Button (push-button) .................. 17
Programming ...................................... 18
Door Lock Polarity Learn Mode .............. 19
Tips for Testing the Alarm ..................... 19
Troubleshooting Guide ........................ 20
TABLE OF CONTENTS
NOTICE
