ENFORCER SLI 820R/-4
Tech Manual
SECO-LARM U.S.A., Inc.
Page 18
PROGRAMMING
A. Procedure:
(1) Disarm the alarm.
(2) Turn the ignition switch ON then OFF.
(3) Within 15 seconds, press and release
the VEPLe button three times and turn
the ignition ON again. The siren chirps
once. (NOTE The time from the
ignition switch OFF to the ignition switch
ON again should not exceed 15 sec.)
(4) Choose the feature to program
Within 15 seconds, press and release
the VEPLe button the number of times
needed to select the feature to be
programmed. The siren chirps once
each time the button is pressed and
released. (NOTE If the VEPLe button
is not pressed within 15 seconds, the
alarm exits the programming mode.)
(5) Toggle the feature ON/OFF Within
15 seconds, press and hold the VEPLe
button to turn the feature ON or OFF.
The siren continually alternates between
1 and 2 chirps to confirm whether the
feature is ON or OFF. Release the
VEPLe button after you hear 1 chirp
(feature ON) or 2 chirps (feature OFF).
(NOTE If the button is not pressed
within 15 secs., the alarm exits
programming mode.)
(6) To program other features, press and
release the VEPLe button the number of
times to reach the next feature. For
instance, if you just programmed
feature no. 2, and now want to
program feature no. 4, press and
release the VEPLe button 2 more times.
Then press and hold the VEPLe button to
turn the feature ON or OFF as per step
(5). (NOTE You must press the VEPLe
button within 15 seconds of the last
press of the button.)
Notes: *1 Does not affect programming chirps or learning chirps.
*2 For BROWN/WHITE wire only.
*3 If Off, alarm chirps once when armed manually, whether door is open or closed.
If On, alarm chirps 3 times to show if a door is open when armed, but also if
delayed domelight is On.
*4 Lock output becomes 25 sec., but unlock support doesnt change. For specific
autos like late-model VWs.
*5 If N.O. starter disable is selected, loop LP1 must be cut. See page 16.
Choose
Description of feature
Confirm chirps - VEPLe button press
Default
feature chirps
1 chirp (on)
2 chirps (off)
setting
1
Alarm chirps
on
off
on (*1)
2
Passive/active mode
active
passive
active
3
Secure Lock
off
on
off
4
Current Sensor
off
on
off
5
Ignition-controlled door lock
off
on
off
6
Ignition-controlled door unlock
off
on
off
7
Ignition off, domelight turns on
off
on
off
8
Pulsed (horn) or continuous (siren) output
pulsed
continuous
pulsed(*2)
9
Door error indicator On/Off
on
off
on (*3)
10
Mercedes Benz one-wire system
off
on
off
11
Door lock/unlock timing
0.5 sec.
3.5 sec.
0.5 sec.
12
Comfort mode
off
on
off (*4)
13
Double-pulse unlock
off
on
off
14
Starter disable output (must also cut loop for N.O.)
N.C.
N.O.
N.C. (*5)
15
Exit program procedure (no feature)
n/a
n/a
n/a
Table C Feature programming using the VEPLe button
