13
14
4.6 To change the PIN of a PIN user
Read card Old PIN # New PIN # Repeat New PIN #
Or
User ID number Old PIN # New PIN # Repeat New PIN #
Remark:
For users without card, must get ID number and initial PIN from the master. For Zone 1, the digit of PIN must be “1”,
for Zone 2, the digit of PIN must be “2”
For the card users with PIN “1234”, must use reading card to change the PIN for the first time.
4.7 Door Bell
Press the door bell button on the access host, the buzzer will sound ring-back tone, at the same time, the smart
controller's built-in door bell or the external door bell will ring. There are 4 working modes optional:
Mode “0”:
Door bell function is unavailable.
Mode “1”:
Access host's ring-back tone is available, i Box's built-in door bell is available, the
external door bell is unavailable.
Mode “2”:
Access host's ring-back tone is available, i Box's
door bell is unavailable, the
external door bell is available.
Mode “3”:
Access host's ring-back tone is available, i Box's
door bell is available, the external
door bell is available.
Remark:
When the access host's working mode is Automatic Mode (Factory Default Mode), without the smart
controller, there will be no ring-back tone.
Automatic Mode:
In this mode, when the access host connects to i Box, it is standalone for single door; If without smart
controller, it work as Wiegand reader automatically.
st
1
st
1
built-in
built-in
5. Alarm
5.1 Anti Tamper Alarm
When enable the anti tamper alarm function, if the access host is disassembled illegally, the access host's buzzer
and the external alarm will operate.
5.2 Door Contact Alarm
When connect with door contact, if the door is opened illegally, the access host's buzzer and the external
alarm will operate.
5.3 Anti-duress Alarm
When read Zone 1 duress card / input 8-digit duress PIN or Zone 2 duress card / input 8
duress PIN, then
press #, the corresponding lock will open, at the same time, the external alarm will operate, but the access host
buzzer will not operate
.
5.4 To Remove the Alarm
Read valid card or input master code can remove the alarm. If there is no operation, the alarm will remove
automatically after 1 min.
-digit
6. To Reset to Factory Default
To reset to factory default, power off, then power on, the logo will turn into orange after 1s, press * within 1s, release
it until hear two beeps, then will hear one long beep and the logo turn in white, means reset to factory default
successfully.
Remark: Reset to factory default, the users' information is still retained.