manualshive.com logo in svg

Seat Toledo 2019, Owner'S Manual, Page: 3 / 300

Share
Download
Seat Toledo 2019 Owner'S Manual Download Page 3

Introduction

Thank you for your trust choosing a SEAT ve-
hicle.

With your new SEAT, you will be able to enjoy
a vehicle with state-of-the-art technology
and top quality features.

We recommend reading this Instruction Man-
ual carefully to learn more about your vehicle
so you can enjoy all its benefits in your daily
driving.

Information about handling is complemented
with instructions regarding the operation and
maintenance of the vehicle in order to ensure
its safety and maintain its value. Moreover, we
want to give you valuable advice and tips to
drive your vehicle efficiently and respecting
the environment.

We wish you safe and enjoyable motoring.

SEAT, S.A.

 

WARNING

Read and always observe safety infor-
mation concerning the passenger's
front airbag 

››› 

page 75, Important in-

formation regarding the front passeng-
er's airbag

.

Summary of Contents for Toledo 2019













































































































































































































































































































Reviews:

No comments