Seat Toledo 2019, Owner'S Manual, Page: 238 / 300

Driving
The manual regulator will remain in this posi-
tion.
Service position
›››
Fig. 235
●
Key
C
is in an open position – the key ar-
row points to the “unlocked” symbol. The key
cannot be removed from the key slot.
●
The
D
locking balls may be fully inserted
into the body of the ball-headed bar by ap-
plying some pressure.
●
The red
E
marking on the manual regula-
tor points towards the white marking on the
ball-headed bar.
●
Between the manual regulator and the
body of the ball-headed bar there is a clearly
visible space of approximately 4 mm
F
.
Once the ball-headed bar has been posi-
tioned like this, it will be ready to be placed in
the clamping bush.
WARNING
Do not use the ball-headed bar if it cannot
be correctly placed in the service position.
CAUTION
The key cannot be removed from the man-
ual regulator key slot when it is in the serv-
ice position.
Assembly of the ball-headed bar
Fig. 236
Placing the ball-headed bar/locking
and removing the key.
Fig. 237 Placing the key slot cover.
–
Remove the cap from the clamping bush
4
›››
Fig. 233 by pulling downwards.
–
Place the ball-headed bar in the service
position
›››
page 235 .
–
Hold the ball-headed bar from underneath
›››
Fig. 236 and push it into the clamping
bush as far as possible until you hear it click
into place
›››
.
The manual regulator
A
automatically
turns in the opposite direction, adjusting to
the ball-headed bar
›››
.
–
Switch off the manual regulator lock with
key
B
by turning the key fully to the right in
the direction of arrow
1
– the arrow in the
key displays the “locked” symbol.
–
Remove the key in the direction of arrow
2
.
–
Place cover
C
over the manual regulator
lock in the direction of arrow
3
›››
Fig. 237 .
236