Seat Toledo 2019 Owner'S Manual Download Page 174

Page: 174 / 300

Infotainment System

Display: Meaning

AF off

The tracking of alternative frequencies is
disabled.

Note

●

The availability of AM and DAB bands de-

pends on the country and/or equipment. In
the event that the AM and DAB bands are
not available, the BAND function button
text will not be shown.

●

Bear in mind that being underground, in

tunnels, in areas with tall buildings or
mountains can interfere with radio signals.

●

Foil or metal-coated stickers attached to

the windows may affect reception on vehi-
cles with a window aerial.

Memory buttons

Fig. 190

Radio main menu.

In the

Radio

main menu, you can store sta-

tions from all available frequency wave-
lengths on the numbered function buttons.
These function buttons are called “memory
buttons”.

Functions of the memory buttons

Selecting the
station from

the memory
buttons

Press the memory button corre-
sponding to the desired station.

The stored stations can only be
played by pressing the corre-

sponding memory button provided

it can be received at your current
location.

Change mem-
ory bank

Move your finger over the screen
from left to right or vice-versa.

OR:

Press one of the function but-

tons

›››

Fig. 190

The memory buttons are displayed

in three memory banks.

Storing the

station on the
memory but-
tons

Keep and hold the desired memory
button until an audible signal is

heard, the station will be stored on
this memory button. You can also
store a station from a station list.

Functions of the memory buttons

Storing the
station logo on
the memory

buttons

A station logo can be assigned to
the stations stored on the memory
buttons.
A logo is automatically assigned

from the database if the Advanced

radio settings option is enabled

A logo can also be assigned man-
ually from an external data source
(USB/SD card).

Not available for the Media System Touch/Colour

model.

Media

Introduction

Fig. 191

Summary of Contents for Toledo 2019













































































































































































































































































































Search results

Summary of Contents for Toledo 2019

Reviews:

Seat Toledo 2019, Owner'S Manual, Page: 174 / 300

Search results

Summary of Contents for Toledo 2019

Reviews: