Seat Toledo 2019, Owner'S Manual, Page: 22 / 300

The essentials
Securing child seats with “ISOFIX”
and Top Tether*
Fig. 27
ISOFIX securing rings.
Fig. 28
Top Tether* securing ring.
Child seats with the “ISOFIX” or Top Tether*
system can be secured quickly, easily and
safely on the rear outer seats.
When removing or fitting the child seat,
please be sure to follow the manufacturer's
instructions.
● Move the rear seat as far to the rear as it
will go.
●
Press the child seat onto the “ISOFIX” re-
taining rings until the child seat can be heard
to engage. If the child seat is equipped with
Top Tether* anchor points, secure it to the
correspondent ring. Observe the manufactur-
er's instructions.
●
Pull on both sides of the child seat to ensure
that it is secure.
Two “ISOFIX” retaining rings are fitted on both
outermost rear seats. In some vehicles, the
rings are secured to the seat frame and, in
others, they are secured to the rear floor. Ac-
cess to the “ISOFIX” rings is between the rear
seat backrest and the seat cushioning. The
Top Tether* rings are located at the rear of
the backrests of the rear seats (behind the
seat backrest or in the boot).
Child seats with the “ISOFIX” and Top Tether*
attachment system are available from Tech-
nical Services.
 ›››
in Safety instructions on
page 76
Starting the vehicle
Ignition lock
Fig. 29
Ignition key positions.
Turn on the ignition: place the key in the igni-
tion and start the engine.
Locking and unlocking the steering wheel
●
Lock the steering wheel: remove the key
from the ignition and turn the wheel until it
locks. In vehicles with automatic transmission,
in order to remove the key, move the gear
shift to the
P position. If necessary, press the
gear shift blocking key and release it.
●
Unlock the steering wheel: put the key into
the ignition and turn it at the same time as the
steering wheel in the direction indicated by
the arrow. If it is not possible to turn the steer-
ing wheel, it may be because it is locked.
20