19
Audio mode
●
Search through the list and press the required station to select it.
●
To close the station list, press the
function button.
The station list closes automatically after a period of inactivity.
No station list is available for the AM frequency band.
Scan function (Scan)
When the scan function is running, all available stations on the current fre-
quency band are played in sequence for approximately 5 seconds each.
●
Open the RADIO main menu and select a frequency band
⇒
page 17.
●
Briefly press the setting knob
⇒
Fig. 1
8
.
●
OR:
In the RADIO main menu, press the
Extras
function button and press
the
Scan
function button in the pop-up window.
The scan function starts and the
Extras
function button changes to
Scan
.
Stopping the scan function
●
Briefly press the setting knob or press the
Scan
function button to stop
the scan function at the station that is currently playing.
Manually selecting a station with the arrow buttons or station buttons also
stops the scan function.
The scan function will also stop if interrupted by a traffic announcement
⇒
page 22.
Tuning to a station frequency manually
Fig. 9 RADIO main menu
with the frequency dial
for the selected frequen-
cy band
Displaying the frequency dial
●
Open the RADIO main menu and select the frequency band
⇒
page 17.
●
Press the
Man.
function button to display the frequency dial of the se-
lected frequency band
⇒
Fig. 9
.
●
OR:
Turn the setting knob
⇒
Fig. 1
8
one stop further.
Adjusting the frequency in stages
●
Briefly press one of the arrow buttons to the right and left of the frequen-
cy dial.
●
OR:
Turn the setting knob.
Quickly browsing the frequency band
●
Place your finger on the slider
in the frequency band and drag it
along the dial.
●
OR:
Briefly press a position on the frequency band. The slider
will
then jump straight to the selected point.
