Sealy Posturematic Adjustable Base Inspire, Owner'S Manual

Page: 9 / 20

9
SEPARATING SECTIONS OF A QUEEN BED
If you separated the two sections of your Queen bed,
make sure to first unplug the cord for the foot lift motor
from the control box before moving the pieces.
After reconnecting the head and foot sections of the
adjustable base, plug this cord back to its port on the
control box before using the bed.
STEP 2: AT TACH THE BED LEGS
Take the bed legs out of the accessories box and attach
them to the bed frame. Turn each bed leg in a clockwise
direction into the threaded holes on the frame. Repeat
for all the legs provided.
STEP 3: SET UP THE ELECTRONICS
Remove and extend the power cord from the adjustable
base.
STEP 4
Take the plastic wrapping off the adjustable frame.
STEP 5
Rotate the adjustable base carefully so the top side is
now facing upward.
STEP 6
Plug the power cord into a working electrical outlet.
STEP 7
Install batteries in the remote control.
Try all functions on the remote to make sure all features
are operational. If the adjustable base does not work,
see the Troubleshooting section of this manual.
STEP 8
Return the adjustable base to a flat position before
continuing with the installation.
Installation Guide
IMPORTANT!
MAKE SURE POWER CORDS DO NOT
OBSTRUCT ANY ADJUSTABLE BASE
MECHANISMS.
NOTE:
Do not rest the frame on its side. The weight may
damage the legs.
NOTE:
For optimal safety, using a surge protector (not
included with this base) is highly recommended.
NOTE:
Make sure your bed is in a flat position before using
it. Press the FLAT button on the remote control after
plugging in the power cord.
NOTE:
Do not overtighten the bed legs.