background image

17

Warranty

ADJUSTABLE BASE:

10 YEAR WARRANTY

SEALY GUARANTEES THAT WE WILL, AT SEALY’S 
OPTION, REPLACE OR REPAIR PURCHASER’S 
SEALY® SYSTEM IF IT IS DEFECTIVE DUE TO FAULTY 
WORKMANSHIP OR MATERIALS, SUBJECT TO THE 
LIMITATIONS DESCRIBED IN THIS WARRANTY.

Notwithstanding anything else contained in this 
warranty, our goods come with guarantees that cannot 
be excluded under the Australian Consumer Law. You 
are also entitled to a replacement or refund for a major 
failure and compensation for any other reasonably 
foreseeable loss or damage. You are also entitled to 
have the goods repaired or replaced if the goods fail to 
be of acceptable quality and the failure does not amount 
to a major failure.

Your Sealy adjustable base system is warranted against
defects in the workmanship or materials for a period of 
ten (10) years from the warranty commencement date.
Electronics, electrical components, drive motors and
massage motors are included. Upon notice during the
first year from the warranty commencement date, 
Sealy will send replacement parts (at no cost to the 
purchaser) for any defective part to the purchaser, and 
Sealy will pay all authorized labour and transportation 
costs associated with the repair or replacement of any 
parts Sealy determines to be defective. This ten (10) 
year warranty shall not apply if purchaser does not 
returnany and all defective parts to Sealy within 15 days 
of purchaser’s receipt of replacement part.

After the 10th year, the purchaser shall bear the entire 
cost of repair and replacement of all parts and materials, 
including labour and transportation.

ADDITIONAL TERMS AND CONDITIONS

This warranty does not apply;
a) to any damage caused by the purchaser;
b) if there has been any unauthorized repair or
replacement of the unit’s parts;
c) if the unit has been mishandled (whether in transit or
by other means), subjected to physical or electrical 
abuse or misuse, or otherwise operated in any way 
inconsistent with the operation and maintenance 
procedures outlined in the Owner’s Manual, this 
warranty, and any other applicable document published 
or approved by Sealy;
d) to damage to mattresses, fabric, cables, electrical
cords or items supplied by Resellers;
e) if there has been any unnecessary service calls,
including costs for in home service calls solely for the
purpose of educating the consumer about the unit for
finding an unsatisfactory power connection; and
f) if the recommended weight restrictions are not
followed (386 kg on all sizes), the warranty will be void.

Repairs to or replacement of the Sealy® system or its
components under the terms of this limited warranty
will apply to the original warranty period and will not
serve to extend such period. The decision to repair or
to replace defective parts under this warranty shall be
made, or case to be made, by Sealy at its option and in
its sole discretion.

SUBJECT TO THE AUSTRALIAN CONSUMER LAW,
REPAIR OR REPLACEMENT SHALL BE THE SOLE
REMEDY OF THE PURCHASER. THERE SHALL BE NO
LIABILITY ON THE PART OF SEALY FOR ANY SPECIAL,
INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES OR FOR ANY OTHER DAMAGE, CLAIM, OR

LOSS NOT EXPRESSLY COVERED BY THE TERMS OF
THIS WARRANTY. THIS LIMITED WARRANTY DOES
NOT INCLUDE REIMBURSEMENT FOR 
INCONVENIENCE, REMOVAL, INSTALLATION, SETUP 
TIME, LOSS OF USE, SHIPPING, OR ANY OTHER COSTS 
OR EXPENSES. SEALY MAKES NO OTHER WARRANTY 
WHATSOEVER, EXPRESS OR IMPLIED, AND ALL IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
A PARTICULAR PURPOSE ARE DISCLAIMED BY SEALY 
AND EXCLUDED FROM THIS AGREEMENT.

This warranty gives the purchaser specific legal rights.
This warranty is valid only for the original purchaser of
the product. An original purchaser is one who 
purchases the product directly from Sealy Australia or an 
authorized Reseller of Sealy. If you are not the original 
purchaser of this Product, you take it “as is” and “with all 
faults“ If you did not purchase this Sealy system directly 
from Sealy, we will require proof of purchase from you 
demonstrating that you are the original purchaser and 
eligible to make a valid claim under this warranty. This 
warranty begins on the “warranty commencement date” 
which is the date of purchase for new unused units, and 
the date of manufacture for units that have been used as 
floor or display models. Thus, on a floor model unit, the 
warranty is a portion of the 10 year warranty. If original 
proof of purchase is not provided by purchaser, Sealy 
reserves the right to determine if the unit is not covered 
by this warranty or to use the manufacturing date as the 
warranty commencement date. This limited warranty 
gives you specific legal rights.

If you experience any trouble with your Sealy® system
during the warranty period, please consult the
troubleshooting section of your Owner's Manual. If
problems persist after following these instructions,
please call: 1300 130 221.

Summary of Contents for Posturematic Adjustable Base Inspire





















Reviews: