Sealed Air Diversey Care TASKI swingo 2100 micro Technical Manual Download Page 88

Page: 88 / 149

GTS

Technical Manual

11. December 2015

Edition: V1.00/2015

5-65

05.

42.

low

er p

art

- f

ron

t co

ver

210

0µi

cro

.fm

5.9

Lower part

5.9.7

Removing of front cover

Picture 97: Front cover

•

Remove the 2 screws (4129073) of the foot cover (4131666).

•

Remove the foot cover.

•

Remove the magnetic valve according to chapter REMOVING OF

MAGNETIC VALVE.

•

Disconnect the wires for the LED strap (4131265) at the

connection block (4047420).

•

Remove the hexagon screw (4016140), the washer (4110070)

and the self-locking nut (4007340) on the RH side.

•

Remove the hexagon screw (4016140), the washer (4110070)

and the self-locking nut (4007340) on the LH side.

Picture 98: Removing front cover

•

Remove the 2 covers (4131868) for the 2 hexagon screws

(4069420) at the front.

•

Remove the 2 hexagon screws and the 2 washers (4110070) at

the front.

Summary of Contents for Diversey Care TASKI swingo 2100 micro












































































































































Search results

Summary of Contents for Diversey Care TASKI swingo 2100 micro

Reviews:

Brands by name

Popular brands

Sealed Air Diversey Care TASKI swingo 2100 micro, Technical Manual

Search results

Summary of Contents for Diversey Care TASKI swingo 2100 micro

Reviews:

Brands by name

Popular brands