Sealed Air Diversey Care TASKI swingo 2100 micro Technical Manual Download Page 45

Page: 45 / 149

GTS

Technical Manual

11. December 2015

Edition: V1.00/2015

5-22

.28

.11

eda

l sp

ring

210

0µi

cro

.fm

5.5

Pedals

5.5.2

Mounting of pedal spring

Picture 27: Mounting pedal spring

•

Position the axle and mount the pedal torsion springs.

•

Position the pedal and fixate it with the axle.

Remarks

When pressing both axles (4131527 & 4131528) together, make sure

that the pedal is nicely in the slot.

•

Mount the screw to fixate the 2 axles.

•

Position the pedal support and mount the 3 screws.

•

Position the foot plate.

•

Mount the two screws.

Remarks

For replacing of hall sensor refer to the chapter REMOVING OF HALL

SENSOR THROTTLE (refer to „Electrical“ section).

Summary of Contents for Diversey Care TASKI swingo 2100 micro












































































































































Search results

Summary of Contents for Diversey Care TASKI swingo 2100 micro

Reviews:

Brands by name

Popular brands

Sealed Air Diversey Care TASKI swingo 2100 micro, Technical Manual

Search results

Summary of Contents for Diversey Care TASKI swingo 2100 micro

Reviews:

Brands by name

Popular brands