Sealed Air Diversey Care TASKI swingo 2100 micro Technical Manual Download Page 62

Page: 62 / 149

GTS

Technical Manual

11. December 2015

Edition: V1.00/2015

5-39

0.1

8 t

ool lower

ing un

it - l

inea

r drive - 21

µicr

o_V1.0

0.fm

5.6

Tool lowering unit

5.6.12 Mounting of linear drive

Picture 50: Mounting linear drive

•

Position the linear drive to mount the upper bolt.

•

Mount the upper bolt.

Take care not to position the linear drive wrongly.

Remarks

Make sure that you position the 2 slide bearings (4126535) and the 2

distance bushes (4131407) at the correct position.

Picture 51: Mounting linear drive detail

•

Mount the retaining washer.

•

Position the linear drive and the tool lowering unit.

•

Mount the lower bolt and the retaining washer.

•

Thread in the cable.

When fixating the cable of the linear drive, make sure the necessary

movement is allowed.

•

Connect the linear drive to the electronics.

•

Mount the seat cover according to chapter MOUNTING OF SEAT

COVER.

Summary of Contents for Diversey Care TASKI swingo 2100 micro












































































































































Search results

Summary of Contents for Diversey Care TASKI swingo 2100 micro

Reviews:

Related manuals for Diversey Care TASKI swingo 2100 micro

Brands by name

Popular brands

Sealed Air Diversey Care TASKI swingo 2100 micro, Technical Manual

Search results

Summary of Contents for Diversey Care TASKI swingo 2100 micro

Reviews:

Related manuals for Diversey Care TASKI swingo 2100 micro

Brands by name

Popular brands