Sealed Air Diversey Care TASKI swingo 2100 micro, Technical Manual, Page: 46 / 149

GTS Technical Manual
11. December 2015 Edition: V1.00/2015 5-23
Copyright © 2015, Diversey Care
05
.30.
13 to
ol low
erin
g un
it
- to
ol low
erin
g un
it
- 210
0µi
cro
_V
1.
00
.fm
5.6 Tool lowering unit
5.6.1 Removing of tool lowering unit
Picture 28: Tool lowering unit
Picture 29: Tool lowering unit details
• Remove the seat cover according to chapter REMOVING OF SEAT
COVER.
• Remove the front cover according to chapter REMOVING OF
FRONT COVER.
• Remove the brush drive according to chapter REMOVING OF
BRUSH DRIVE.
• Disconnect the linear drive (4127185) for the offset and the
brush motor (4131254) at the electronics (4131532).
Remarks
For correct position of the connections refer to chapter ELECTRONICS
CONNECTIONS (refer to “Electrical” section).
• Thread out the cables of the linear drive for the offset and the
brush motor.
• Remove the 2 water hoses (4028460) from the outlet of the
pump (4123169).
• Loosen the counter nut and remove both nuts of the metal rope
compl (4131425) on the left and right side.
• Pull out the endings of the metal rope compl through the slots
in the steering unit (4131239).
• Remove one retaining washer (4058370) of the lower bolt
(4127022) connecting the tool lowering unit and the linear drive.
• Remove the bolt to one side.