Sealed Air Diversey Care TASKI swingo 2100 micro Technical Manual Download Page 100

Page: 100 / 149

GTS

Technical Manual

11. December 2015

Edition: V1.00/2015

5-77

05.

68.

42 b

rus

e -

fla

t bel

t p

ull

ey -

00µi

cro

1.00

.fm

5.10 Brush drive

5.10.5 Removing of flat belt pulley

Picture 116: Flat belt pulley

•

Remove the brush drive according to chapter REMOVING OF

BRUSH DRIVE.

•

Remove brush belt according to chapter REMOVING OF BRUSH

BELT.

•

Remove the brush coupling (4122648) carefully with a screw

driver.

•

Remove the flanged bush (4122649) with the gasket (4122440).

•

Remove the retaining ring (4008690).

•

Pull off the flat belt pulley (4122763) from the support

(4109900).

Picture 117: Removing flat belt pulley

Summary of Contents for Diversey Care TASKI swingo 2100 micro












































































































































Search results

Summary of Contents for Diversey Care TASKI swingo 2100 micro

Reviews:

Sealed Air Diversey Care TASKI swingo 2100 micro, Technical Manual, Page: 100 / 149

Search results

Summary of Contents for Diversey Care TASKI swingo 2100 micro

Reviews: