SPARROW HAWK
Instruction Manual
10
Repeat the procedure for other wing
haft.
Secure the servos with the screws pro-
vided with your radio system.
Pull.
Electric wire.
1) Aileron control horn:
Mix a small amount of 30 minute epoxy and
lightly coat the inside of the hole in the aileron
and the 3x45mm control horn screw.
AILERON CONTROL HORN INSTALLATION.
3x45mm.
3.2mm.
M lock nut.
3
Wing bottom.
M nut.
3
control horn.
Aluminium washer.
Pre-drill at factory.
Aileron Electric.
Plastic tape.
Aileron control horn.
String.
Wing.
Aileron.
2) Thread the screw (insert the washer)
into the hole from the top of surface. Wipe away
any excess epoxy on the wing and screw with
rubbing alcohol and a paper towel. Screw the
M3 nut (insert the washer) in place as shown.
Alllow the epoxy to fully cure.
