SPARROW HAWK
Instruction Manual
12
6) Reinstall the gear wire and install the
straps using the four 3 x 15mm wood screws.
Tighten the screws completely to secure the
gear wire in place.
5) Remove the two straps and the gear
wire. Drill four 1.5mm pilot holes into the wing
for the wood screws.
3) The landing gear wire is held in place
using two nylon landing gear straps and four
3mm x 15mm wood screws.
The straps should be located equal dis-
tance from the inside and outside ends
of the wire.
4) Using the two landing gear straps as
a guide, mark the locations of the four 3 x
15mm mounting screws onto the wing sur-
face.
1.5mm.
1.5mm.
Epoxy glue.
Machine screw 3 x 15 mm.
Remove
covering.
Support mounting
block possition.
