12
Occurrences of this are extremely rare and are usually a result of Voltage Spikes or strong Electro-Magnetic
Interferences.
The Device may also be reset by depressing the Black reset Button on the Circuit Board. This does not effect any of the
overall operation of the VMC; it purely pulls the device back as if it were initially powered up. The only information lost on
pressing the Black Button is the following:
1. Any Credit on the display will be cleared
2. Any error Codes that occurred are cleared.
Summary Of Software Versions
Motor Version Numbers
Ver
1 2 3 4 5 6 FLASH
TAS
NOTES
DATE
1.00
X
X
X
Dec ‘03
1.01
X
X
X
extension of column empty check
Feb
’04
1.02
X
X
X
Extension of column empty check & Countdown on vend
Mar ‘04
1.03
X
X
X
Improved motor handling, shortened timing value
Jun ‘04
**.: Includes 00—07 minor device changes
TAS: Token Access System
ACC: Accumulated Audit Readings
SOLD OUT FEATURE
After pressing the button and if there is no can in any/all four selections, the Display will show ‘SOLD OUT’. However
other the other selections can be made as usual.
Note:
DISPLAY may also show ‘SOLD OUT’ in case motor is not in home position or if the motor is faulty.
Section 3
MONEY MECHANISM
COIN VALIDATOR
The Coin Validator receives the coin from customers. The Coin Validator will accept quarters, dimes, and nickels, and can
be set to accept the new golden dollar. For (F) series of Vendors the Coin Validator will be preset to accept U.K. and Euro
coins.
One (1) coin box is provided with your vendor, it is stored in the bottom of the vertical shelf. Once the front door is opened,
pull out the coin box to empty it.
CLEANING
Your Coin Validator needs to be cleaned only when the Coin Validator no longer reads the coin values.
1. Cleaning the Optics. You will need cotton swabs, and a mild soap and water solution.
a. Unlock and open the front door
b. Remove the Coin Box, and Pull the Vertical shelf out.
c. Swab the lenses with the solution, and reassemble.
VERTICAL SHELF REMOVAL
To Remove the Vertical Shelf
a. Unlock and open the Front door, unplug the Vendor
b. Slide out the Vertical Shelf completely
c. Disconnect wiring harness
d.
Unscrew the two screws holding the vertical shelf using allen key at top right side of the shelf. (Fig. 5)
e. Remove the vertical shelf. (Fig. 5)
Fig.5
