7
10
J
X
X
00.50
YES
11
K
X
X
00.10
YES
12 L
X X X 00.05
YES
13 M
X X X X 10.00
NO
14
N
X
X
X
20.00
NO
15
O
X
50.00
NO
Notes:
- Coin Values between 00.00 and 99.99 can be set to any coin
- Setting a value of 00.00 to a coin still allows the coin to be accepted.
- The machine will automatically exit from Coin Value Setting within 60 seconds unless a button hasn’t
been pressed or coin inserted in that time.
- All the variable coin values may be set at the same value if required.
Control Word Setting
This is essentially to do with the Coin handling and Vend-credit status. The Control Word is a two (2)-digit number used to
indicate to the vendor the required method of operation. This controls the operators desired relationship between coins
inserted and vend price depending upon the power supply. The code is input within the Service Code count
CONTROL WORD MAP
Code Battery Mains Escrow Credit
Vs
Vend
Price
(before vend is performed)
Excess Credit
(difference between credit and vend price)
01
X
X
X
CREDIT= VEND PRICE
None
02 X
X X
0.99> (CREDIT-VEND PRICE]> 0 Excess Credit Cancels [if any]
03
X
X
X
CREDIT> VEND PRICE
Excess Credit Cancels [if any]
04
X
X
X
CREDIT> VEND PRICE
Excess Credit Carried Forward
05
X
X
X
CREDIT> VEND PRICE
Excess Credit Carried Forward for 60 sec
06
X
X
X
FREE VEND – NO CREDIT
REQUIRED
None
07
X
X
X
TEST VEND- NO CREDIT
REQUIRED
None
Press the red service button repeatedly until
Displays
Ct.**
(where ** is current value)
You are now in Control Word Setting
To change the current value, we first need to adjust the displayed code
Press Selection Button 1 to increment the --.** value
Displays
Ct.**
Press Selection Button 2 to decrement the --.** Value
Displays
Ct.**
That is the control word set; now we need to store it
Press Selection Button 4 to store the new Control Word
Displays
Cntr set
Press Red Service Button to exit or Press Reject Button to exit.
Notes:
The default Control Word is ‘03’ – (Excess Credit Cancels)
Codes 05 [Multi-vend with Time out] allows for the excess credit to be carried forward on the credit for up to 60
seconds. This time is prolonged if a coin is inserted or a selection is pressed for a further 60 seconds from that
input. After 60 seconds the excess is cancelled.
The time out canceling only applies to excess credit (surplus credit after a vend) and not credit inserted prior to
any vend.
The setting of a Control Word outside of the allocated codes, results in the machine reverting back to its original
code (not default)
The machine will return to Normal Mode {00.00} 60 seconds after the last button has been pressed unless the
Red Service Button has been pressed or the reject is pressed.
During ‘Free Vend’ the machine will display ‘ FrEE’