14
The Beverage Can Unit is a refrigerated unit. The Unit has 4 different lanes handling 26 Cans each. Total Can handling
capacity is 104. The unit incorporates a self-contained pull out type refrigeration deck.
ACCESSING CAN UNIT
The can dispensing unit can be easily accessed by opening the two locks at the top of the can unit door (Fig. 6). The door
is then opened downwards. This is the area where the beverage cans are filled in to the vendor. The door and the vending
flaps of the can unit can be dislodged from the can unit by removing two screws, (use allen key no.5) which are located on
either side of the machine below the can unit door.
Fig.6
LOADING CANS
Unlock the can unit door. To Load cans in the vendor follow the steps mentioned along with the diagrams below.
Note:
Cans must always be loaded from the bottom shelf first.
See diagram below. Beverage Cans can be directly loaded into the can shelves using the can unit door as a ramp to roll
down the can in the lower shelf.
First Load the bottom shelf with 3 cans (step 1)
Locks