17
The Cans are vended as per Fig.7
Note:
The beverage cans in the lower shelf will be the last to be vended by the machine. The new product stock must be
loaded in the lower shelves. The old cans retrieved from the lower shelf of the vendor be loaded on the top shelf. These
cans will now be vended first by the can unit, thus ensuring that no old stock is vended from the machine
.
REFRIGERATION DECK
Your beverage vendor incorporates a high efficiency refrigeration system having two air circulation fans to chill the cans.
The refrigeration unit can be easily accessed by opening two screws located on the front bottom panel of the vendor.
Remove the two screws at the mid point of the Panel (Fig.8) The refrigeration Deck can now be pulled out from the
vendor.
Fig.8
ACCESS POINT FOR THERMOSTAT
The Thermostat Knob can be adjusted without pulling out the refrigeration deck (Fig.9). The Knob is accessible through a port located
on the extreme right hand side of the vend area below the fourth can dispense driver motor. Turning the Knob clockwise will lower the
temperature in the dispensing unit and vice versa.
Condenser
Two Screws to fasten the
deck to the vendor
Thermostat
Knob
Shelf No.1 vends first
Shelf No.2 vends second
Shelf No.3 vends third
Shelf No.4 vends last
Compressor
Air circulation fans
Fig.7
