Rev. 2013.08.19
8
Figure 7b – Loading Product
HELIX COIL LOCATION ADJUSTMENT
If you are required by a location to vend a product that is not on your Plan-O-Gram, you may need to
order a different helix coil and install it. To replace a helix coil:
1. Remove the Helix Coil from the Coil Driver by lifting the back of the helix coil up off the coil
driver. You will need to move the bottom of the helix coil clear of the coil driver to completely
remove the helix coil. See Figure 8.
2. Align the new helix coil end with the front of the tray, which gives the helix coil better contact
with the product. The position of the helix coil in the coil driver is adjustable to assist you in
aligning the new helix coil at the front of the tray. See Figure 8.
This Coil adjustment can be done for all the Selections on Snack and Entrée units.
Figure 8 – Removing and Aligning a Helix Coil
Helix Coil Driver
with 5 adjustment
options
Lift Helix Coil
Move bottom of
Helix Coil to clear
Coil Driver and
remove
Back of Product
Tray, Snack or
Entrée
Incorrect
Incorrect
Correct – load product between coils,
resting on the product tray.
