Rev. 2013.08.19
7
Figure 6 – Slide-out product trays
1. To Load Product in Snack Unit and/or Entrée Unit:
a. Pull the desired product tray all the way forward. Product tray will tilt down.
Note:
Pull out only one (1) product tray at a time
b. Place product in proper size helix coil.
Note:
Bottom of product must rest on
the product tray and not on the
Helix Coil. Load each column from back to front.
Note:
Fill all product trays fully; do not leave any spaces behind or between items
c. Once product tray is fully loaded, lift and push it back in.
Repeat steps a through c until all product trays are fully loaded. Special Note: We suggest that you
always partially fill the tray with product and perform at least five (5) test vends. Test vends can be
performed easily by entering Service Mode and running the “tE” function -Individual motors testing.
PRODUCT LOADING
Snack Unit
Wide products such as Chips bags etc. are loaded in Tray 1 and Tray 2. Narrow products such as
Candy bars are loaded in Tray 3. See Figures 7a and 7b.
Figure 7a – Loading Product
Lift up plastic lock
lever
Grasp tray
while
holding up
lever and
pull
forward
Correct – load
product between
coils, resting on
the product tray,
never on the
bottom loop of
the coil.
Incorrect
Coil
Product Tray
