Rev. 2013.08.19
28
Q. Everything is working properly on my unit so why are errors listed under Display Errors?
A. There are hard errors that simply need to be cleared. Go into the Clear Errors from the Menu
and follow instructions to clear (See Page 18).
Transporting and installing:
Q. Do I have to test my equipment before placing it on location? Must I disassemble to
transport to the location? Is there a way to do a general check of equipment without full
assembly?
A. We suggest full testing prior to the unit being moved to the location. Why? It gets you familiar
with the machine so that you look professional and efficient when at the location setting up
the machine. Complete assembly of the machine for testing is not required; you could test
vend the snack machine on the floor next to the Beverage unit or set it on top of the
Beverage unit. The Entrée unit could be tested sitting next to the snack machine as well.
Q. Can the snack and beverage machine be transported while attached? Loaded?
A. The units should never be transported attached. Additionally, transporting with product
loaded voids manufacturer’s warranty and can damage your equipment. Transport units
unattached and empty of product/change only.
Q. Can I place the beverage unit on its side for transport?
A. Never place the beverage machine in any other position but upright. There are numerous
components that can be jostled out of place, becoming very problematic for you. Once the
machine is set in place, the compressor needs to rest for a minimum of 2 hours prior to
running in order for the oils in the compressor to return to their non-threatening position.
Q. My Beverage Unit door will not line up & lock. What can I do?
A. This may be caused by an unlevel machine, perhaps on an uneven surface. We suggest you
put all the units together and securely bolt them together as per the instructions. This should
resolve any fit issues.
Q. Should I use a surge protector for the equipment?
A. A surge protector is a small investment that can product your equipment. We recommend
using a surge protector.
