950-0207revA - 6 - November 27, 2013
MULTI-ZONE OPERATION
The Multi-Zone mini-split will operate each zone in either cooling or heating mode but not both. The
unit will not operate as one zone cool and another heat. If this occurs, an
E7
error will be displayed. To
clear this error, make sure all indoor units are in the same mode either heat or cool. Each zone will
control the room temperature at set-point and allow all normal fan, swing, turbo, timer, and sleep
functions.
Notes:
1. Indoor fan does not turn off in the cooling mode when temperature set point has been satisfied. It
will continue to run to keep the room temperature consistent.
2. Indoor fan will turn off in heating mode when temperature set point has been satisfied.
3. Unit may require several minutes to confirm the condition of temperature set point and system
functions.
OPERATION OF WIRELESS REMOTE CONTROL
REMOTE CONTROL DISPLAY
The system matches below are not recommended if all indoor units may require simultaneous continuous duty at full efficiency.
24K + 24K
18K + 18K + 18K
9K + 18K + 24K
9K + 21K + 21K
9K + 21K + 24K
12K + 18K + 21K
12K + 18K + 24K
12K + 21K + 21K
12K + 12K + 24K
9K + 9K + 18K + 18K
9K + 12K + 12K + 18K
9K + 12K + 12K + 21K
12K + 12K + 12K + 18K
9K + 9K + 9K + 24K
9K + 9K + 12K + 21K
9K + 9K + 12K + 24K
12K + 12K + 12K + 12K
9K + 9K + 9K + 21K
9K + 9K + 9K + 9K + 18K
9K + 9K + 9K + 12K + 12K
9K+ 9K + 12K + 12K + 12K
9K + 9K + 9K + 9K + 12K
TRANSMIT
DRY MODE
TIME DISPLAY
TIMER ON/OFF
LOCK KEYPAD
DISPLAY ILLUMINATE
PURGE
AUTO MODE
COOL MODE
FAN AUTO MODE
FAN SPEED (HI, MED, LO)
LOUVER POSITION
CLOCK SET
HEAT MODE
FAN MODE
SLEEP MODE
SET TEMPERATURE
TURBO
