DOCS-001 Manual, SeaBotix Inc. Users, 150 – 200 Series - Rev B – 27 Jan 10 -
Page 42 of 64
Step 5
Remove the (2) M4 x 10 Phillips head screws securing the
middle of the float to the backplane.
Step 6
Remove the (2) M6 x 16 button head screws securing the
front of the float to the backplane.
Step 7
Remove the float.
Step 8
Remove the (4) Phillips head screws securing the forward
Kort nozzles to the port and starboard thruster assemblies
and the (2) screws securing the thruster hold down tabs;
then remove the Kort nozzles.
Step 9
Remove the (3) Phillips head screws securing the lateral
Kort nozzle to the lateral thruster and remove the Kort
nozzle.
Step 10
Remove the black plastic Phillips head screw at the
propeller end of each thruster end cap. Four (4) total.
Step 11
Locate the GLA003 grease syringe. Push the syringe into
the hole exposed from the removal of the plastic screw.
