manualshive.com logo in svg

SeaBotix LBV150, User Manual, Page: 31 / 64

Share
Download
SeaBotix LBV150 User Manual Download Page 31

 

DOCS-001 Manual, SeaBotix Inc. Users, 150 – 200 Series - Rev B – 27 Jan 10 - 

Page 31 of 64 

 
 

2.3.5  

Diagnostics 

Menu 

 

1. SYSTEM 

allows access to thruster status information; RPM temp, serial 

number current, and fault code if any.  RPM is not displayed for SBT150 
thrusters.

 

 
2. Software Version 
 

a.  Pressing the 2 key will allow you to view the current software versions.  

This information is important when technical assistance is required. 

 

CC –Operator Control Unit 
ROV – LBV Operational Program (Flash Program.) 
BL – Boot Loader 
TMC – Thruster Motor Controller 
SB – Sensor Board 
VPS – Vehicle Power Supply 

 

3. Hours Run 

a.  Pressing the 3 key will allow you to view the number of hours that the 

LBV has been powered up. 

 

4.  Display Ext. Temp 

a.  Pressing the 4 key will display the internal temperature of the LBV 

where the external temperature is normally displayed.  When you exit 
the menu the temperature reading resets to the external temperature. 

 

2.3.6  

Options 

Menu 

 

1. Camera Rotate 

a.  Pressing the 1 key will allow you to turn camera rotate on and off. 

 

Camera rotate allows the user to select how the camera rotate responds 
when the CAMERA button is pushed on the operator control unit.  Turn 
camera rotate on when you wish to view the same perspective on each 
camera as you switch between the two.  Turn camera rotate off when you 
wish to use the first camera to look straight ahead and the second to look 
down. 
 

2. Audio Channel 
 

a.  Pressing the 2 key will allow the user to switch between the internal 

microphone or the optional external hydrophone. 

 

3. Camera Tilt 
 

Summary of Contents for LBV150

































































Reviews:

No comments