SeaBotix LBV150 User Manual Download Page 23 | Manualshive

Page: 23 / 64

SeaBotix LBV150 User Manual Download Page 23

DOCS-001 Manual, SeaBotix Inc. Users, 150 – 200 Series - Rev B – 27 Jan 10 -

Page 23 of 64

The POSITION button allows the user to change the position of the overlay
data. Pressing the POSITION button once will move the overlay data from

the bottom of the screen to the top of the screen. If pressed again, the overlay will turn
off leaving the monitor screen with no overlay data. Pressing the button again will turn
the overlay on with the data at the bottom of the screen. (page 22, section 2.2).

2.1.14

ACCESSORIES

If optional accessories are fitted such as a grabber the and the

keys allow the user to activate the accessory. For the grabber, the opens, and the
closes the jaws.

2.1.15

KEYPAD

The KEYPAD offers a variety of functions. When adjusting the
gain control for the thrusters, the numbers are used to select the
percentage of power available. The keypad is used to input
alphanumeric data on the user programmable annotation on the
Video Overlay. Also, the keypad is used to manipulate the menu
screens. Pressing the PRGM key will access the menu screens.
Use the numbers to select the desired option. See the Menus
(page 21, section 2.3) for more information.

«
...
21
22
23
24
25
...
»

Summary of Contents for LBV150

































































Reviews:

No comments