![background image](http://html.mh-extra.com/html/seaboater/100/100_specifiations_1221514047.webp)
Jammers to be Spinlock and Organizers to be Custom Spinlock or Custom Yard:
Qty
Part No.
Description
2
ZS1014C
Main Halyard and Spare Main/Topping Lift Jammer
1
ZS1014C
Masthead Spinnaker Halyard Jammer
2
ZS1014C
Genoa & Fractional Spinnaker Halyard Jammers
1
ZS1014C
Staysail Halyard
3
ZS1014C
Reef Lines
4
Custom
Halyard Organizer, Six Sheave Double Stacked
11.4. Toe Rail
A teak toe rail 30mm x 30mm x 7800mm shall be installed at the tangent point of the
deck and the sheer radius. The side decks aft of the shrouds to have no toe rail.
Material Required:
15.6m of 30x30 teak.
11.5. Fair Leads & Cleats
Cleats and fairleads are to be the folding type for a clean deck.
One pair of cleats fwd.
One pair of cleats midships.
One pair of cleats aft.
No fair leads to be used, as cleats are mounted at deck edge.
Cleats to be located as per the deck plan. Cleats are to securely bolted to deck using
glass washer plates to spread the load.
Items Required:
6 off of Versari & Delmonti 0263-AN (400mm) Fold Down Cleats.
11.6. Life Lines, Pulpit & Pushpit
Lifelines to be installed as shown, particular care being given to height as developed on
the working drawings. Stanchions to be 28mm OD stainless steel tubing with a 1.6mm
wall and stainless steel heads shaped as per drawing. Stanchion bases to be composite
tubes let into the sheer at the toe rail and secured to inside skin of hull. Top lifeline to be
6mm diameter 1x19 stainless steel wire and lower lifeline to be 5mm 1x19 stainless
steel wire.
There shall be gangway openings port and starboard. Stanchions at the gangway shall
have braces to the deck and special heads to take the terminals. Openings to be fitted
with a wire pennant similar to the lifelines and fitted with a Gibb type pelican hook.
Pulpit and pushpit to be fabricated of the same material as the stanchions and socketed
into composite tube bases. To be fitted with side lights and stern lights as directed. The
pulpits shall be strong and rigid enough to safely stand on either the upper or lower
tubes. Wiring to be internal. The centerline opening between the pushpits to be fitted
with wire pennant similar to the lifelines and fitted with Gibb type pelican hooks.
One (1) gangway, to be provided, on centerline, accessible from the pushpit opening.
To be manually deployed from the dinghy locker. To have de-mountable stanchions
47