5.3. Hull Ceilings
To be painted satin/matte white or upholstered (Alcantara) lightweight plywood panels
where hull is exposed to the interior, otherwise to be bare hull. Backs of hanging lockers
to have cedar battens.
5.4. Doors
To be of the flat panel type with veneer/finish to match surrounding brightwork. Locker
doors to be veneered flat panel per plans. All doors to be honeycomb cored to prevent
warping. All passage doors must have maximum height permitted by deck structure.
Styling details to be coordinated between Architect and Builder.
5.5. Lockers
Hanging lockers to be finished inside. Hanging lockers to be fitted with shelves, rods
and hooks as directed. Shelves to have fixed fiddles. All hanging lockers to have
provisions for ventilation thru louvered doors.
Wet locker to be finished inside with Formica and provided with a fixed rod, rack for
drying boots. Wet locker door to have louvers. Sole to be grated and drain to bilge.
5.6. Countertops
Galley countertop height to be 920mm, head and vanity countertop heights to be
870mm. Galley countertop to be Corian as selected by Owner with aluminum
honeycomb backing and 50mm high lip at back splash. Galley sink to be undermounted
to Corian worktop.
Head countertops with integral basins to be Corian as per Architect detail, colour as
selected by builder. To have fixed integral Corian fiddles as directed.
5.7. Drawers and Dish Cabinets
All drawers to be on stainless steel Mepla (or equal) type runners that are self closing
and with stops to prevent pulling out and latches to fix in the closed position. Drawer
faces to be cutout from primary panel.
Cutlery drawers, dish cabinets, and glass racks to be fitted with partitions, depressions,
guides and lift-out trays as required to suit individual pieces. Glass and dish racks to
have fixed felt-covered guides.
5.8. Storage Spaces
All storage spaces including forepeak and lazarette to be fitted with shelves, bins, hooks
as per plans or as directed.
5.9. Ladders
Main companionway ladder to be built of teak or equal laminated sides and treads, with
raised rubber non-skid. Forepeak ladder to be aluminum with aluminum rungs or tubular
composite construction.
16
