Sea Tel ST24, Operation And Installation Manual

Page: 5 / 101

ST24 Ku-Band TVRO Quick Start
2-1
2. Quick Start
Operation of the ST24 Series antenna is accomplished via the
G
raphic
A
ntenna
C
ontrol
P
anel (GACP). Once properly
configured, the antenna will automatically search for and identify the last targeted satellite held in memory. Because of
programming requirements or changing of geographic locations, you may be required to change what satellite you wish to
track.. Read below for general panel operation instructions.
2.1. General Panel Operation
The GACP is a Panel Mount touch screen controller and navigation through its main and sub menu’s is accomplished
by pressing the desired icon itself and not the descriptive text below the icon. When applicable, the Left and Right
arrows may be used to navigate between main menu pages. The HOME icon may be pressed to return to the HOME
Page from any given menu or sub menu display. The Panel will go into a locked mode after five minutes of inactivity.
The Panel will go into Sleep mode after being in a locked mode for five minutes. NOTE: The Antenna will still be fully
functional. Press anywhere on the screen to bring the panel out of sleep mode and access the “Panel Unlock” screen.
The graphic to the right depicts the proper way to navigate through the menus by pressing
the icon itself.
The graphic to the right depicts the incorrect way to navigate through the menus by
pressing on the displayed text.
Navigational icons that are in full color are considered valid selections such as the “BACK”
arrow shown to the right.
Navigational icons that are in black and white are considered invalid selections, such as the
“BACK” arrow shown to the right.
2.2. Target a Satellite
Use the following flow chart to target a satellite.
Is desired preset
available on page?
Yes
Yes
Is desired preset
available on page?
From the Home Page
No
Satellite
Preset is not
defined, refer
to “Configuring
a Preset”.
No
Press the
Satellites Icon
Press the
Target Icon
Press the
Satellite Preset
Name Icon
Press the
Right Arrow
Icon
Normal
Operation