Sea Tel ST24 Operation And Installation Manual Download Page 2

Page: 2 / 101

Sea Tel Marine Stabilized Antenna systems are manufactured in the United

States of America.

Sea Tel is an ISO 9001:2008 registered company.

Certificate Number 13690 issued March 14, 2011.

The Coastal Series of Marine Stabilized Antenna Pedestals with Antenna Control Panel

complied with the requirements of European Norms and European Standards EN 60945

(1997) and prETS 300 339 (1998-03) on June 30, 1999. Sea Tel European Union Declaration

of Conformity for this equipment is contained in this manual.

Copyright Notice

may not be reproduced or distributed in any form without prior consent of Sea Tel, Inc. The information in
this document is subject to change without notice. Copyright © 2010 Sea Tel, Inc is doing business as

Cobham SATCOM.

This document has been registered with the U.S. Copyright Office.

Revision History

REV

ECO#

Date

Description

August 24, 2010

Preliminary Release

ECM

September 30, 2010

Updated text and graphics per Product Manager Feedback, added
LNB replacement Procedure, added Manual to AutoPol Conversion

Procedure

ECM

November 3, 2010

Updated text and graphics to reflect current software build features.

Added Setup Wizard procedure

ECM

December 20, 2010

Production Release

ECM

January 23, 2011

Updated text and graphics to reflect current software build features.

ECM

8491

May 19, 2011

Updated text, graphics and drawings to reflect current production

build.

ECM

Summary of Contents for ST24






































































































Search results

Summary of Contents for ST24

Reviews:

Brands by name

Popular brands

Sea Tel ST24, Operation And Installation Manual

Search results

Summary of Contents for ST24

Reviews:

Brands by name

Popular brands