Sea Tel ST24, Operation And Installation Manual, Page: 15 / 101

ST24 Ku-Band TVRO Installation
3-9
From below the mounting surface, apply Loctite
thread locker to the four M8 mounting studs.
Install the fender washers and the M8 nut and
Torque to 15 N-m.
NOTE:
Graphic to the right is shown with the radome
mounting pad (normally installed flush with mounting
adapter) removed for clarity.
Using a 3mm Allen Wrench, remove the hardware
that secures radome top to radome base.
Use caution as to not lose the mounting inserts.
Locate and disengage the Elevation Stowage lock.
Refer to the Maintenance section of this manual
for complete procedures to stow and un-stow your
antenna.