Sea Tel ST24, Operation And Installation Manual

Page: 21 / 101

ST24 Ku-Band TVRO Setup
4-3
6. (Skip to the next step
if
you have selected “Inactive” in the previous screen) Select the amount of satellites
required as specified by your service provider.
7. Press the Right Arrow to begin the Satellite Preset selection process. The chosen presets will be displayed on
the Satellite Target, Edit, and View menus. If you are operating a DiSEqC based system, you will need to
know how many satellites are required before continuing. Refer to your EchoStar Receiver owner’s manual
for detailed information on how to perform a check switch test.
8. Using the Up and/or Down Arrows, cycle through the available list of preset satellites until your desired
satellite is displayed the press save to submit. Press the right arrow to move to the next preset.