Sea Tel ST24 Operation And Installation Manual Download Page 40

Page: 40 / 101

Operation

ST24 Ku-Band TVRO

5-16

5.5.2.1.

Manual Control Page

Description

Function

System Status

Rolling text indicating the systems current status of:
Initializing, Searching, Targeting, Identifying, Tracking, or Unwrapping.

POL

Click to drive feed assembly (Polang) CW or CCW.

Time Stamp

Current time stamp, based on the antennas on –board GPS.

AGC

System Signal Strength in AGC counts with visual signal bar.

Click to initiate a linear azimuth sweep search pattern.

Tracking

Click to toggle tracking state.

Rev

Click to “reverse” drive direction of current search pattern

Azimuth, Elevation, Polang

Azimuth, Elevation, and Polarization Readout

Click to drive antenna in azimuth one whole degree.

Click to drive antenna in elevation one whole degree.

Home

Click to access the GACP Home Page.

Back

Click to access the previous Page.

Forward

Non-Functional in this screen.

Panel Lock

Press to “Lock” the GACP interface.

Summary of Contents for ST24






































































































Search results

Summary of Contents for ST24

Reviews:

Sea Tel ST24, Operation And Installation Manual, Page: 40 / 101

Search results

Summary of Contents for ST24

Reviews: