Sea Tel 5012-91, Installation Manual, Page: 89 / 138

Codan Mini-BUC Ethernet M&C Install & Operation 5012-91 Installation Manual
16-3
16.4. Issuing Set, Output and View Commands via Telnet
To start a Telnet session on the LAN interface:
1. From the
Start
menu, select
Run
.
2. Type
telnet <IP address of the Mini-BUC> 6000
in the Open field, then click on
OK
. For example, type
telnet 192.168.0.12 6000
3. At the Login: prompt type netuser codan , then press Enter .
4. Type
hlp
then press
Enter
, or refer to the Codan Manual for a complete list of commands.
A list of help categories is displayed. You can use these commands to drill down for further help for the
Set
,
Output
and
View
commands for the Mini-BUC. For example, type
hsc
, then press
Enter
to see the help for
the
Set commands
.
5. If you want to exit the Telnet session, type quit , then press Enter .