Sea-doo RXP-X 260, Operator'S Manual

Page: 72 / 156

OPERATING INSTRUCTIONS
mBAR PSI
BOOST
VTS POSITION INDICATION
The VTS system allows for manually
adjusting the trim position of the noz-
zle, or selecting two preset trim posi-
tions and recording or changing preset
trim positions on certain models.
VTS Trimming Methods
AVAILABLE VTS TRIMMING
METHODS
RXP-X
260
VTS trim Button X
VTS "Double Click" trimming X
VTS "Presets" X
VTS trimming through
multifunction gauge
N.A.
X = Indicates a standard feature
- = See a Sea-Doo dealer for availability.
N.A. = Not available
Trimming the VTS Using the VTS
Button
Five trim positions are available.
With the watercraft operating in for-
ward position, proceed as follows:
1. Press the VTS UP button once to
trim the bow of the watercraft up to
the next trim position.
NOTE: Pressing the VTS trim button
without the engine in forward position
will only change the indication. The
nozzle will move to the selected VTS
trim position when forward position is
engaged.
2. Press the VTS DOWN button once
to trim the bow of the watercraft
down to the next trim position.
smo2012-003-008_a
TYPICAL - VTS CONTROL BUTTON
1. Bow up
2. Bow down
NOTE: If the VTS UP/Down button
is pressed and held, the pump nozzle
will keep moving until the button is
released at the desired trim attitude,
or the maximum trim position (up or
down) is reached.
mBAR PSI
BOOST
VTS POSITION INDICATION
Using Preset Trim Positions
Two preset trim positions can be se-
lected.
To select the highest trim position
recorded, double-click on the VTS UP
button (bow up).
To select the lowest trim position
recorded, double-click on the VTS
DOWN button (bow down).
NOTE: If only one preset trim position
is recorded, double-click either UP or
DOWN of the VTS button.
70
______________