Sea-doo RXP-X 260, Operator'S Manual, Page: 55 / 156

INFORMATION CENTER (GAUGES)
mBAR PSI
BOOST
1
2
NUMERICAL DISPLAY SELECTION
1. Type of selected numerical display
indication
2. Applicable value
4. Press the SET button to select and
save the preferred indication, or
wait for the display function to time
out. The last indication visible will
be automatically saved.
The following abbreviations are used in
the numerical display:
– FT or M
– RPM
– MPH or Km/h
– °F or °C
– AM or PM
– Gal/h or l/h.
Resetting Numerical
Display Indication
The following numerical display indica-
tions can be reset:
– Average fuel consumption
– Top speed
– Average speed
– Top RPM
– Average RPM.
To reset indications, double click the
SET button. The numerical display will
momentarily indicate zero (0).
NOTE: Each of these functions be-
come active ONLY when selected as
the numerical display indication.
Multifunction Gauge
Setup
Changing Clock Setting
1. Press the MODE button repeatedly
until SETTINGS is visible in the mul-
tifunction display.
mBAR PSI
BOOST
MESSAGE DISPLAYED
SETTINGS
2. Press the UP or DOWN button re-
peatedly until CLOCK is visible.
mBAR PSI
BOOST
1
2
FUNCTION SELECTED - CLOCK
1. CLOCK message
2. Time
3. Press the SET button to enter the
function. CHANGE CLOCK OFF-
SET message will be displayed.
_______________
53