Sea-doo RXP-X 260, Operator'S Manual

Page: 62 / 156

EQUIPMENT
smo2012-003-018_b
1. Self-adhesive screws
Reposition sponson to desired posi-
tion.
Install NEW self-adhesive screws and
torque to specification.
WARNING
Whenever the sponsons are ad-
justed, the self-adhesive screws
must be replaced and torqued to
specification. Otherwise, loss of
sponson may occur which could
cause a loss of control of the wa-
tercraft.
TIGHTENING TORQUE
Sponson
screws
18 N•m ± 2 N•m
(159 lbf• in ± 18 lbf• in )
(P/N 250 000 572) (NEW SCREWS
REQUIRED)
Proceed the same way for the other
side.
WARNING
Both sponsons must be installed
and adjusted at the same height.
Missing sponsons or improper ad-
justment will affect handling and
stability, which could cause a loss
of control of the watercraft.
10) Adjustable Ergonomic
Steering (AES)
The handlebar width and angular posi-
tion of the controls may be adjusted to
driver preference by extending and ro-
tating the handlebar extension tubes.
NOTE: To carry out the ergonomic ad-
justments, see an authorized Sea-Doo
dealer.
smo2010-002-006_c
ERGONOMIC ADJUSTMENTS
1. Handlebar width adjustment
2. Angular position adjustment of controls
11) Trim Tabs
Trim tabs are present on PWC hull to
provide adequate bow attitude in all
conditions.
smo2012-003-020_a
1. LH side shown - trim tab
60
______________