Sea-doo RXP-X 260, Operator'S Manual

Page: 53 / 156

INFORMATION CENTER (GAUGES)
mBAR PSI
BOOST
1
2
FUNCTION SELECTED: LAP TIMER
1. Lap time
2. Lap count
3. To start the timer, press the SET but-
ton.
NOTE: The timer starts immediately
when pressing the SET button.
4. To record each lap time, press the
SET button at the start of each lap.
NOTE: The lap time will be recorded,
the lap counter in the numerical display
will count the number of laps recorded,
and the timer will continue to run.
5. To save the last lap and stop the
timer, press the MODE button.
To view each lap time, use the UP or
DOWN button. The lap counter will
indicate which lap is indicated.
To view the cumulative lap time of all
laps recorded, use the UP or DOWN
button until ALL is visible in the lap
counter.
mBAR PSI
BOOST
1
2
MESSAGE DISPLAYED: LAP TIMER
1. Total time
2. ALL is displayed here
To reset the lap timer and lap counter,
press and hold the SET button until the
timer and counter are reset to 0 (zero).
Fuel Consumption
The FUEL CONSUMPTION function
is used to display the watercrafts fuel
consumption in four different ways.
– Instant fuel flow per hour (gal/h or
l/h)
– Average fuel flow per hour (gal/h or
l/h)
– Distance to empty (Mi or Km)
– Time to empty (h or min).
The fuel consumption functions are
not continuously active.
A fuel consumption function becomes
active only when selected as the indi-
cation in the numerical display.
When the LOW FUEL indications
come on in the multifunction gauge,
the "TIME TO EMPTY" and "DISTANCE
TO EMPTY" functions will indicate "0"
(zero) if they are the selected indica-
tion.
To display the watercraft fuel con-
sumption, carry out the following:
1. Press the MODE button repeatedly
until FUEL CONSUMPTION is visi-
ble in the multifunction display.
mBAR PSI
BOOST
MESSAGE DISPLAYED
FUEL CONSUMPTION
2. Press the UP or DOWN button to
toggle to the desired fuel consump-
tion display mode.
_______________
51