Sea-doo RXP-X 260, Operator'S Manual, Page: 42 / 156

CONTROLS
NOTE: Some vehicle safety labels are not shown on illustrations. For information
on vehicle safety labels, refer to
WATERCRAFT SAFETY LABELS
subsection.
smo2012-003-101_a
RXP-X
NOTE: Some controls, indications,
functions and features described in
this section may not apply to every
PWC model, or may be available as an
option.
1) Handlebar
The handlebar controls the direction of
the watercraft. During forward opera-
tion, turning the handlebar to the right
steers the watercraft to the right and
inversely.
WARNING
Check handlebar and correspond-
ing steering nozzle operation be-
fore starting. Never turn handle-
bar while someone is near the rear
of the watercraft. Keep away from
the propulsion system.
When operating in reverse, steering
direction is reversed. Turning the han-
dlebar to the right while backing up
steers the watercraft to the left.
2) Engine START/STOP
Button
The engine START/STOP button is lo-
cated on the LH handlebar. It is used to
wake up the electrical system as well
as to start and stop the engine.
smo2012-003-008_b
TYPICAL
1. START/STOP button
Waking Up the Electrical System
Press the START/STOP button once
without installing the tether cord on
the engine cut-off switch.
40
______________