Sea-doo GTX 4-GTI, Operator'S Manual

Page: 52 / 138

F18L0IY
1
TYPICAL
1. Boarding step
Pull down the step with your hand and
hold until a foot or a knee is put on the
step.
F18L0JY
27) Flushing Connector
A convenient connector is provided
to allow easy installation of a garden
hose to flush the exhaust cooling sys-
tem.

WARNING
When operating the engine while
the watercraft is out of the water,
the heat exchanger in the ride plate
may become very hot. Avoid any
contact with ride plate as burns
may occur.
F18L0TY
ALL MODELS EXCEPT RXP
F19J01Y
1
RXP MODELS
1. Flushing connector
On some models, an additional flush-
ing connector is located in engine
compartment to allow flushing while
watercraft is on a lift or if you prefer to
flush from this location, either flush-
ing connector can be used to flush
the exhaust cooling system. Remove
seat to gain access.
50
______________________