Sea-doo GTX 4-GTI, Operator'S Manual

Page: 42 / 138

7) Information Center
Gauge
This is a multifunction gauge that
supplies several real time useful infor-
mation to the driver either in English,
French or Spanish. See an authorized
Sea-Doo dealer for unit settings.
At start-up, all LCD segments and in-
dicator lights will turn on for 3 sec-
onds each time the information center
is activated (when safety lanyard is in-
stalled). This allows the driver to vali-
date they are all working properly.
smo2006-002-009_a
GTI MODELS
1. Speedometer
2. Tachometer
3. Fuel level
4. Information display
5. Indicator lights
smo2006-002-008_a
OTHER MODELS
1. Speedometer
2. Tachometer
3. Fuel level
4. Information display
5. Indicator lights
6. Water depth display
7. Water temperature display
8. VTS position indicator
1) Speedometer
Speedometer indicates the speed of
watercraft in miles per hour (MPH) or
kilometers per hour (km/h).
2) Tachometer
Tachometer indicates the revolutions
per minute (RPM) of the engine. Mul-
tiply by 1000 to obtain the actual revo-
lutions.
3) Fuel Level
Bar gauge continuously indicates the
amount of fuel in the fuel tank while
riding. A low-fuel condition is also in-
dicated on the information display as
only one bar is displayed. See
MES-
SAGE DISPLAY
below.
4) Information Display
Compass
Displays the cardinal points to indicate
the orientation of the watercraft.

WARNING
Use the compass as a guide only.
Not to be used for navigation pur-
poses.
GTI Models Only
Water Temperature (if so equipped)
Displays the water temperature of the
water surface in degrees Celsius (°C)
or Fahrenheit (°F).
NOTE:
Water temperature and depth
gauge will be displayed alternately.
Water Depth (if so equipped)
Display the water depth under the hull
within 0 to 50 meters (0 to 170 feet).
NOTE: Under certain conditions, the
gauge may stop displaying. The
gauge ability to display the depth
depends on the usage conditions.
40
______________________