Sea-doo GTX 4-GTI Operator'S Manual Download Page 50

Page: 50 / 138

CAUTION:

Never use the grab han-

dle to tow anything or to lift the wa-

tercraft.

20) Rear Storage Basket

(if so equipped)

A convenient watertight, removable

basket to carry personal articles.

F18L0GY

1. Rear storage basket

Spare Spark Plug Holder

The storage basket features a spare

spark plug holder.
To keep spare spark plugs dry and pre-

vent shocks that might affect the ad-

justment or break them, a holder is

provided.
Unscrew cap counterclockwise to ex-

pose the holder and insert spark plug

in their holes. Reinstall cap.

F18L0HY

1. Storage basket
2. Spare spark plug holder cap
3. Spark plug holder

NOTE:

Adjust spare spark plug gap ac-

cording to

SPECIFICATIONS

before in-

stallation.

NOTE:

Spare spark plugs are not sup-

plied with the watercraft.

21) Front and Rear

(bow/stern) Eyelets

Front (bow) Eyelet

Eyelets can be used for mooring, tow-

ing and as a tie-down point during trai-

lering.

F00L0EY

1. Front (bow) eyelet

______________________

Summary of Contents for GTX 4-GTI











































































































































Search results

Summary of Contents for GTX 4-GTI

Reviews:

Related manuals for GTX 4-GTI

Brands by name

Popular brands

Sea-doo GTX 4-GTI, Operator'S Manual

Search results

Summary of Contents for GTX 4-GTI

Reviews:

Related manuals for GTX 4-GTI

Brands by name

Popular brands