Sea-doo 210 Challenger Series, Operator'S Manual

Page: 58 / 156

GAUGES
NOTE: The lap time will be recorded,
the lap counter (in numerical display)
will count the number of laps recorded,
and the timer will continue to run.
5. To save the last lap time and stop the
timer, press the MODE button.
To verify the recorded lap times, use
the UP and DOWN switch to toggle
through all lap times.
To reset an individual lap time:
1. Using the UP and DOWN switch, go
to the lap time to be reset.
n i
M A
h /l a g M P R
p a l
lmo2010-003-095
2. Press and hold the SET button until
the lap time is reset.
To reset all lap times:
1. Using the UP and DOWN switch, go
to ALL.
n i
M A
h /l a g M P R
p a l
lmo2010-003-096
2. Press and hold the SET button until
the time is reset to 0 (zero).
Multifunction Display
When the boat is being operated, the
multifunction display provides an indi-
cation of compass heading or scrolling
messages from the monitoring sys-
tem.
It also displays a menu for the selec-
tion of various functions which, permit
changing the numerical display indi-
cation, system modes of operation,
settings, and displaying system fault
codes.
WARNING
Selecting various numerical dis-
plays, system modes of opera-
tion or changing settings should
only be carried out with the boat
stopped. Selecting these various
functions while operating the boat
at speed is not recommended as
it deters your attention from situa-
tional awareness.
n i
M A
h /l a g M P R
p a l
lmo2010-003-028
MULTIFUNCTION DISPLAY - COMPASS
HEADING INDICATED
Selecting Functions
When operating at speed, the multi-
function display normally provides an
indication of the compass direction and
azimuth the boat is traveling.
To select the various functions avail-
able through the multifunction display,
press the MODE button repeatedly un-
til the desired function is visible:
– SKI MODE
– CRUISE MODE
56
______________