Sea-doo 210 Challenger Series, Operator'S Manual

Page: 52 / 156

GAUGES
The gauge is illuminated whenever the
navigation lights are used.
The fuel level can also be verified with-
out having engines running. Turn ig-
nition key ON; the gauge will be acti-
vated for approximately 30 seconds.
3) Analog Voltmeter
The voltmeter is located to the right of
the information center.
The voltmeter displays the battery
voltage. Normally, it should indicates
around 14 V (volts).
lmo2010-003-301_b
1. Analog voltmeter
2. Information center
NOTE: It is normal to see a voltage
drop during engine cranking.
4) MODE Button
This button is located on driver's con-
sole at the right of steering wheel, be-
low the analog fuel gauge.
Press this button to scroll various func-
tions through the digital screen in the
information center.
lmo2010-003-023_b
1. MODE button
2. Analog fuel gauge
For further details on the information
center and the display modes, refer to
INFORMATION CENTER .
5) SET Button
This button is located on driver's con-
sole at the right of steering wheel, be-
low the analog fuel gauge.
lmo2010-003-023_c
1. SET button
Press SET to select the desired func-
tion or to save any modified settings.
For further details on the information
center and the display modes, refer to
INFORMATION CENTER
.
6) UP and DOWN Switch
This switch is located on driver's con-
sole at the right of steering wheel, be-
low the analog fuel gauge.
lmo2010-003-023_d
1. UP and DOWN switch
Move the switch stem up or down to
navigate through the selected function
using MODE or SET buttons or to mod-
ify settings.
50
______________