GAUGES
NOTE:
The UP and DOWN switch
is also used for adjusting boat speed
when operating in CRUISE mode.
For further details on the information
center and the display modes, refer to
INFORMATION CENTER
.
7) Information Center
The information center is a cluster of
gauge, indicator lights and a digital
screen to display operational informa-
tion to the operator.
The text message can be displayed in
six different languages and the units
of measurement can be displayed in
metric or imperial units. See an autho-
rized Sea-Doo Sport Boats to have the
information center set to the unit of
measurement and available language
of your choice.
It allows the operator to view at a
glance several indications such as ,
engines RPM, fuel level and engine
temperature. The gauge can also be
used to navigate through and select
several functions, modes of operation
and change certain settings and sys-
tem parameters.
Indicator lamps advise the operator of
selected functions or malfunctions.
The gauge incorporates a GPS (global
positioning system) that it uses for
the compass and speedometer indi-
cations, and provides signals to other
systems as required for their opera-
tion.
NOTE:
An information center self test
can be initiated by turning the ignition
key in ON position. All LCD segments
and indicator lights will turn on for ap-
proximately 3 seconds.
Should a fault be detected during the
self-test function, an error message
will be displayed, an indicator light may
come on, and an audible signal (beep
code) may be heard to signal that a
fault has been detected.
A fault code can be generated and
memorized to assist your authorized
Sea-Doo Sport Boats dealer in trou-
bleshooting the faulty system. Refer
to
FAULT CODE DISPLAY
in this sec-
tion for instructions on how to display
fault codes.
WARNING
Reading the message on the in-
formation center digital screen
can distract from the operation of
the boat, particularly from con-
stantly scanning the environment.
This could lead to a collision. Be-
fore reading, ensure your environ-
ment is clear and free from obsta-
cles, and bring the boat to a low
speed.
Before proceeding with
any adjustments, make sure the
surroundings are clear and safe to
do so.
lmo2010-003-011_a
INFORMATION CENTER FUNCTIONS
1. Tachometer (Port Engine)
2. Tachometer (Starboard Engine)
3. Indicator lights
4. Digital screen
5. Fuel level
6. Numerical display
7. Multifunction display
8. Depth sounder indicator
9. Hour meter display (Port Engine)
10. Engine (P = Port, S = Starboard)
11. Hour meter display (Starboard Engine)
12. Compass
_______________
51
Summary of Contents for 210 Challenger Series
