Se-Kure Controls,
®
Inc.
3714 Runge St. • Franklin Pk., IL 60131 • 1-(800) 322-2435 • Fax: (847) 288-9999
Rev.4/10/97
©1997 Se-Kure Controls,
®
Inc.
SCI-9568
Installation Instructions for the
“LE PLUS” System Parts & Accessories
“LE PLUS” System Sensors & Adhesives
– Available in Standard 6' Cable Lengths - (PC/LE - Coiled) & (P/LE - Straight Wire) –
SK-905
Rectangular
Adhesive
Pad
1" x 2"
1
1
/
4
" x 1"
7
/
16
" x
11
/
16
"
1" x 1"
SK-906
Bug Sensor
Adhesive
Pad
SK-908
Tie Sensor
Adhesive
Pad
SK-909
Ant Sensor
Adhesive
Pad
7
/
16
" x
11
/
16
"
SK-909NP
Neopreme
Ant Sensor
Adhesive Pad
SKD-6165
Dual- Ant & Tele. Modular
SKD-6163
Dual- Ant & Mini Phone Modular
SKD-6161
Dual- Ant Sensor & Ant Sensor
SKD-0443
Dual- Rectangular & Tie Sensor
SKD-0453
Dual- Rect. & Collar Lasso
SKD-0461
Dual- Rect. & Ant Sensor
SK-997
Pneumatic (Air Tool) Sensor
SK-965
Telephone Modular Sensor
SK-927
Parallel Port Sensor
SK-925
Serial Port Sensor
SK-904
Rectangular Push-N-Go Sensor
SK-110
Extra Key for Alarm Module
SK-107LE
“LE” Splitter Box w/6 Modular Ports
SK-943T
Tie Wrap
SK-10106LE
“LE” Strip Alarm w/6 Ports
SK-10112LE
“LE” Strip Alarm w/12 Ports
SK-99-623
Strip Clips
SK-1912
Rectangular Removal Tool
SK-1712
Round Removal Tool
SKP-200T
Wire (Tele. Plug) Removal Tool
SK-103LE
“LE” Alarm Module
SK-109
Extra Telephone “Shunt Plug”
SK-195
AC/DC Power Supply
SK-947-10
10' (Str. Wire) “LE” Extension w/Coupler
SK-953
Collar Lasso Sensor
SK-902
1" x 1" Bug Sensor
SK-943
Tie (No-See) Sensor
SK-961
Ant Sensor
SK-940
Rect. (Micro Switch) Sensor
SKD-0425
Dual- Rect. & Serial Port Sensor
SKD-0465
Dual- Rect. & Tele. Modular
SK-998
Microphone Sensor
SKD-0404
Dual- Rectangular & Rectangular
Sensor Connections:
– To Lenses (SK-943 Series Lens Sensor)
12.
Insert the Tie-Wrap into the Lens Sensor as shown in Fig. 5, and wrap it
around the lens. Pull the Tie-Wrap tight, and cut off the excess with wire
cutters or scissors.
Sensor Connections:
– To Cameras with Removable Lenses
(SKD-0443 Series Dual Sensor)
13.
The Dual Sensor, (shown in Fig. 6) is a combination of the Rectangular
Sensor and the Lens Sensor for cameras with removable lenses. Follow
Steps 9 thru 12 for installation procedures.
Sensor Connections:
– (SK-953 Series Collar Lasso Sensor)
14.
The Collar Lasso Sensor has a wire connector that loops around the
product and plugs back into itself using a telephone modular plug.
15.
The Collar “Lasso” can be installed onto products be “Lassoing” any
enclosed part of the product and plugging this module back into itself,
(see Fig. 7).
Testing the System:
16.
With all sensors plugged into Splitter Boxes or Strip Alarms, and Shunt
Plugs in all unused Ports, the GREEN light on the front of the Alarm Module
should be “out”. Turn the Alarm Module key “Counter Clockwise” to the
“ON” position. The Alarm should remain silent.
15.
Remove (1) plug from a Sensor Port and the alarm should (((sound))) with
that sensor port’s
GREEN
indicator light “ON”. This indicates an “open cir-
cuit”. Turn the key “Clockwise” to the “OFF” position, Re-Install the plug in
the sensor port, and turn the “Counter Clockwise” back to the “ON” position
and remove.
THE ALARM IS NOW OPERATING!
NOTE: For Safety. . . Cables Should Be 18" Above the Floor.
Fig. 5
Fig. 6
Fig. 7
SK-943T
Tie-Wrap
SKD-0443
Dual Sensor
SK-953
Collar Lasso Sensor
SK-943
Tie Sensor
