SDT Sherlog Kit Master SDT270 Technical And User'S Instruction Manual Download Page 12

Page: 12 / 61

File name: MAN.MAS.EN‐‐02X‐‐Sherlog‐Master‐user‐manual‐Eng.docx

12/60

4.2

The keyboard

The keys correspond to the following functions:

Key

Function

Remarks

Function keys

Function of the key is related to the displayed symbol or text above
(on LCD screen). There are 3 function keys provided which are
referred to as “F1” – “F2” – “F3”.

Save

Stores the measurement data.

Freeze/Measure

Freezes the displayed value or take measurement in static mode

Start recording

Only used when measuring ultrasound and noise levels (dBµV) in
dynamic mode.

Navigation keys

Moving the cursor up and down within menus.

Increase / reduce
amplification level

The A on screen is modified (measurement screens).

Scroll up and down through
menus and sub‐menus

In‐ / Decrement
alphanumeric digits

Used during the text entering procedure or to set date, etc.

Navigation keys

Moving the cursor left and right.

Move the cursor to another
field

Used during the text entering procedure to jump to another field, etc.

In‐ / Decrement output
volume

Summary of Contents for Sherlog Kit Master SDT270






























































Search results

Summary of Contents for Sherlog Kit Master SDT270

Reviews:

Related manuals for Sherlog Kit Master SDT270

Brands by name

Popular brands

SDT Sherlog Kit Master SDT270, Technical And User'S Instruction Manual

Search results

Summary of Contents for Sherlog Kit Master SDT270

Reviews:

Related manuals for Sherlog Kit Master SDT270

Brands by name

Popular brands