SDT Sherlog Kit Master SDT270, Technical And User'S Instruction Manual

Page: 25 / 61

File name: MAN.MAS.EN‐‐02X‐‐Sherlog‐Master‐user‐manual‐Eng.docx
25/60
7.2.4 Set the Auto Power Down time
From the
Settings
menu, select / Auto Power Down
This function sets the time for the instrument to switch off power automatically to save the
battery power. This function is activated when the instrument is not in use and that no key
is hit during the pre‐programmed time. The timer is adjustable between 1 and 100 minutes.
The default is set to 10 minutes. Use up and down arrow keys to change the value. Use the
left arrow key to set the value to zero and so deactivate the auto power down.
Leave this menu by pressing the F1 escape button.
7.2.5 Network settings
From the
Settings
menu, select / Network
Enter the IP address and Default gateway. Your system administrator and/or the network
administrator will have this information.
(See 0 Connecting the device on a computer network)
Leave this menu by pressing the F1 escape button.
When your device is not connected to a Network, it is advised to parameter the LAN to disable. This setting
permits to increase the battery autonomy of more than 20%. Use the
Right Arrow to highlight the LAN
enabled field, then using the Up Arrow set the field to NO .
7.2.6 Factory Restore
From the
Settings
menu, select / Factory Restore
This function force a factory reset of the device. Note that this does not erase saved
measurements.
Leave this menu by pressing the F1 escape button.